SuperWorkstation SW5039A-i  Cad/CAM

PCODE: SW5039A-i 

Intel® Xeon® W-2123 Processor 8.25M Cache, 3.6 GHz upto 3.9GHz

16GB DDR4-2400 2RX8 ECC RDIMM

120GB SSD SATA 6Gb/s

Seagate 3.5″ 1TB SATA 6Gb/s 7.2K RPM 128MB

NVIDIA PNY Quadro P400 2GB GDDR5 PCIe 3.0 – Active Cooling

42,513,108 vnđ

Số Lượng :

Thông số kĩ thuật

Form Factor Mid-Tower
MotherBoard Super X11SRA
Processor Intel® Xeon® Processor W Family  / Single Socket R4 (LGA 2066),
CPU TDP support up to 140W
Chipset Intel® C422 chipset
Memory
  • 8 DIMM slots
  • Up to 512GB Registered ECC LRDIMM
  • Up to 256GB Registered ECC RDIMM
  • Up to DDR4-2666MHz
  • 64GB, 32GB, 16GB, 8GB, 4GB  – 2666/2400/2133MHz ECC DDR4 SDRAM
Hard Drive 4 fixed 3.5″ drive bays

Enterprise SATA HDD only recommended

Raid Controller SATA3 (6Gbps) via Intel C422 controller

RAID 0, 1, 5, 10 support

Ethernet Single LAN with Intel® PHY I219LM LAN controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 outputSingle LAN with Aquantia 5G LAN chip AQC108
Audio 7.1 HD Jacks
VGA NVIDIA PNY Quadro P400 2GB GDDR5 PCIe 3.0 – Active Cooling
Expansion Slots 3 PCI-E 3.0 x16 slots (8/16/16, 48 lanes)

1 PCI-E 3.0 x4 slot

Power Supply 900W PSU

Key Features
• CAD/CAM/CAE, 3D Rendering, Digital Content Creation,
Oil and Gas Simulation, Research lab/National Lab
• Dual Socket P (LGA 3647) support:
Intel® Xeon® Scalable processors; dual UPI up to 10.4GT/s
• 16 DIMMs; up to 2TB ECC 3DS LRDIMM, up to DDR4-2666MHz
• 4x 3.5″ drive bays supported by 90° rotating hard drive cage
• Optional 4x 2.5″ internal drive bays (supports 2 NVMe via opt. cables)
• 2x 5.25″ Peripheral drive bays
• 4 PCI-E 3.0 x16, 2 PCI-E x8
• 2x 1GbE, 1 Dedicated IPMI port
• 1 VGA, 1 COM, 6 USB 3.0, 2 USB 3.1, M.2, 7.1 HD Audio
• 1 rear 12cm exhaust fan, 1 front 12cm cooling fan
• 1200W Platinum Level Power Supply

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “SuperWorkstation SW5039A-i  Cad/CAM”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *